Ford is issuing a safety recall in North America for approximately 350,000 2018 F-150 and 2018 Expedition vehicles with 10-speed automatic transmissions, as well as 2018 F-650 and F-750 vehicles with six-speed automatic transmissions. The recall is for a potentially unseated transmission gear shift cable clip.
On some of the affected vehicles, a clip that locks the gear shift cable to the transmission may not be fully seated. Over time, a partially seated clip or a clip that becomes dislodged may allow the transmission to be in a gear different from the shift position selected by the driver.
This could allow the driver to move the shifter to park and remove the key, even though the transmission gear may not actually be in park. No warning message or chime would result when the driver’s door is opened. If the parking brake is not applied, this could result in unintended vehicle movement, increasing the risk of injury.
“Ford is aware of one reported accident and injury related to this condition,” the automaker said in a statement.
Affected vehicles include:
- 2018 Ford F-150 vehicles built at Dearborn Assembly Plant, Jan. 5, 2017 to Feb. 16, 2018.
- 2018 Ford F-150 vehicles built at Kansas City Assembly Plant, Jan. 25, 2017 to Feb. 16, 2018.
- 2018 Ford Expedition vehicles built at Kentucky Truck Plant, April 3, 2017 to Jan. 30, 2018.
- 2018 Ford F-650 and F-750 vehicles built at Ohio Assembly Plant, April 25, 2017 to March 9, 2018.
The recall involves approximately 347,425 vehicles in North America, with 292,909 in the United States and federalized territories, 51,742 in Canada, and 2,774 in Mexico. The Ford reference number for this recall is 18S10.
Dealers will inspect and verify that the shift cable locking clip was properly installed. If the clip is not properly seated, technicians will adjust the shifter cable and secure the locking clip at no cost.
Second Recall
Ford is issuing a second safety recall in North America for approximately 161 2017 and 2018 F-150 and 2018 Expedition vehicles, in addition to 2018 Mustang and 2018 Lincoln Navigator vehicles with 10R80 transmissions. The recall is for a potentially missing roll pin that attaches the park pawl rod guide cup to the transmission case.
The cause for concern is similar to above, where unintended vehicle movement could take place. Ford states they are not aware of any accidents or injuries involving this second recall affecting these vehicles:
- 2017-18 Ford F-150 vehicles built at Dearborn Assembly Plant, Oct. 20, 2016 to March 5, 2018.
- 2017-18 Ford F-150 vehicles built at Kansas City Assembly Plant, Dec. 22, 2017 to Feb. 26, 2018.
- 2018 Ford Expedition vehicles built at Kentucky Truck Plant, Nov. 28, 2017 to Feb. 14, 2018.
- 2018 Ford Mustang vehicles built at Flat Rock Assembly Plant, Nov. 6, 2017 to Feb. 12, 2018.
- 2018 Lincoln Navigator vehicles built at Kentucky Truck Plant, Dec. 13, 2017 to March 8, 2018.
The recall involves approximately 161 vehicles in North America with 142 in the United States and federalized territories, 18 in Canada, and one in Mexico. The Ford reference number for this recall is 18S09. Dealers will inspect the transmission and install the roll pin if necessary at no cost.
For more information on this, or any other recall, visit Safecar.gov.
The Automoblog Staff contributed to this report and can be reached anytime.
Source: Ford Motor Company.
from Automoblog.net https://ift.tt/2H07GQv
No comments:
Post a Comment